Brussels / 3 & 4 February 2024

schedule

Covert Ground Based Synthetic Aperture RADAR using a WiFi emitter and SDR receiver


Using a WiFi emitter as radiofrequency source illuminating a scene under investigation for slow movement (e.g. landslides), a Ground-Based Synthetic Aperture RADAR (GB-SAR) is assembled using commercial, off the shelf hardware. The dual-channel coherent Software Defined Radio (SDR) receiver records the non-cooperative emitter signal as well as the signal received by a surveillance antenna facing the scene. Spatial diversity for azimuth mapping using direction of arrival measurement is achieved by moving the transmitter and receiver setup on a rail along a meter-long path -- the longer the better the azimuth resolution -- with quarter wavelength steps. The fully embedded application runs on a Raspberry Pi 4 single board computer executing GNU Radio on a Buildroot-generated GNU/Linux operating system. All development files are available at https://github.com/jmfriedt/SDR-GB-SAR/

Speakers

Photo of Jean-Michel Friedt Jean-Michel Friedt

Links